top of page
The National Film and Television School, UK, 2024:
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I lined the set using fabric and faced the side of the stairs using MDF and fabric. I made some of the balustrades using MDF and fabric and made the cupboard handle, hinges and ventilation grate using chemiwood, cotton covered copper wire and acrylic paint.
45 x 42 x 8 cm
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I lined the set using fabric and faced the side of the stairs using MDF and fabric. I made some of the balustrades using MDF and fabric and made the cupboard handle, hinges and ventilation grate using chemiwood, cotton covered copper wire and acrylic paint.
45 x 42 x 8 cm
The National Film and Television School, UK, 2024:
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I built the corner cupboards, architrave, vents, hinges and handles using balsa wood, foamboard, MDF, fabric, chemiwood, cotton covered copper wire and acrylic paint.
33 x 16.5 x 4 cm
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I built the corner cupboards, architrave, vents, hinges and handles using balsa wood, foamboard, MDF, fabric, chemiwood, cotton covered copper wire and acrylic paint.
33 x 16.5 x 4 cm
The National Film and Television School, UK, 2024:
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made a 70’s style fireplace and grate using chemiwood, balsa wood, foamboard, fabric and thread.
58 x 44 x 10 cm
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made a 70’s style fireplace and grate using chemiwood, balsa wood, foamboard, fabric and thread.
58 x 44 x 10 cm
The National Film and Television School, UK, 2024:
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made a 70’s style fireplace and grate using chemiwood, balsa wood, foamboard, fabric and thread.
58 x 44 x 10 cm
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made a 70’s style fireplace and grate using chemiwood, balsa wood, foamboard, fabric and thread.
58 x 44 x 10 cm
The National Film and Television School, UK, 2024:
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made a wicker basket and tree branches/tentacles using balsa wood, cotton covered steel wire, acrylic paint, fabric and thread.
5 x 11 x 6 cm
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made a wicker basket and tree branches/tentacles using balsa wood, cotton covered steel wire, acrylic paint, fabric and thread.
5 x 11 x 6 cm
The National Film and Television School, UK, 2024:
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made an animatable tree trunk and branches using a wire armature, foam sheeting, toy stuffing, fabric and threads.
75 x 30 x 10 cm
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made an animatable tree trunk and branches using a wire armature, foam sheeting, toy stuffing, fabric and threads.
75 x 30 x 10 cm
The National Film and Television School, UK, 2024:
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made a plant plot/stand using balsa wood, copper/aluminium wire, nappy liner fabric and acrylic paint.
14 x 4.5 x 4.5 cm
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made a plant plot/stand using balsa wood, copper/aluminium wire, nappy liner fabric and acrylic paint.
14 x 4.5 x 4.5 cm
The National Film and Television School, UK, 2024:
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made cardboard boxes using card, fabric, ink-pen and acrylic paint.
7.5 x 7.5 x 7.5cm
I made scissors using chemiwood / acrylic paint.
0.2 x 1 x 2 cm
I worked on a graduate stop motion film, 1:8 scale, where everything was designed to look like it was made from fabric.
I made cardboard boxes using card, fabric, ink-pen and acrylic paint.
7.5 x 7.5 x 7.5cm
I made scissors using chemiwood / acrylic paint.
0.2 x 1 x 2 cm
Test shots from my stop motion animation that I am currently working on. Plasticine and wire armature.
12 frames per second.
12 frames per second.
Test shots from my stop motion animation that I am currently working on. Plasticine and wire armature.
12 frames per second.
12 frames per second.
I’m currently making a model of a Cornish Pixie, referenced from film stills from Harry Potter and the Chamber of Secrets. Wire armature, polymer clay, glass beads, plastic thread and acrylic paint.
10 x 6 x 4 cm
10 x 6 x 4 cm
Made during my time at Makinarium, UK, Pinewood Studios.
I made a 2-part silicone mold from a 3D-printed model, designed by Jet Cooper and Robin Lawrence.
Cast it in EasyFlo 60 resin, used Easy1 filler, sandpaper, scalpel, Dremel. Painted using grey primer, matt black acrylic, 2k clear lacquer with spray gun, chrome paint with airbrush, Dirty Down + Goldfinger to create finish.
Elven Blade, 2024,
40 x 5.5 x 4.5 cm
I made a 2-part silicone mold from a 3D-printed model, designed by Jet Cooper and Robin Lawrence.
Cast it in EasyFlo 60 resin, used Easy1 filler, sandpaper, scalpel, Dremel. Painted using grey primer, matt black acrylic, 2k clear lacquer with spray gun, chrome paint with airbrush, Dirty Down + Goldfinger to create finish.
Elven Blade, 2024,
40 x 5.5 x 4.5 cm
Made during my time at Makinarium, UK, Pinewood Studios.
I made a resin cast molded from a 3D printed panther head designed by Jet Cooper, with fibreglass jacket, graphite powder, acrylic paint and Goldfinger finish.
30 x 35 x 11 cm
I made a resin cast molded from a 3D printed panther head designed by Jet Cooper, with fibreglass jacket, graphite powder, acrylic paint and Goldfinger finish.
30 x 35 x 11 cm
bottom of page